MASTERPAV WB 100 Color Stain
MASTERPAV WB 100 Color Stain is a water-based stain that is specifically designed to be non-reactive and semi-transparent. It has the ability to penetrate and color most cementitious surfaces. Applying MASTERPAV WB 100 Color Stain to these surfaces creates a dual-tone effect or serves as a secondary colorant. This ready-to-use formulation is easy to apply, has a low odour, and dries quickly, making it ideal for use on both interior and exterior surfaces.
The product can be use as a colorant staining to any concrete surface such as Microtopping System, Sandwash, Broom Finish and Concrete Stamping.
BENEFITS
N/A
PRODUCT INFORMATION
Packaging
MASTERPAV WB 100 COLOR STAIN = 1 Lt bottle
INSTRUCTION FOR USE
SURFACE PREPARATION
The concrete surface to receive the MASTERPAV WB 100 Color Stain shall be free of all contaminants (paints, glues, sealers, curing agents, efflorescence, chemical contaminants, rust, algae) that could affect the adhesion. Loosely bound particles can be removed by air blower.
MIXING
Shake the bottles well before using.
Light agitation may help to homogenize slight separation during long storage.
APPLICATION
For better opacity or hiding power, apply MASTERPAV WB 100 Color Stain onto the surfaces directly. It is can be apply by a pressurized pump sprayer or by a roller or by brush.
Ensure a sufficient material is applied every over the entire surface to get a maximum penetration. For better color enhancement, apply 2 or 3 coat of MASTERPAV WB 100 Color Stain.
For less opaque color, dilute MASTERPAV WB 100 Color Stain with 1 to 1 treated water. Maximum allowable coating is 3 coat only, more than that will affect the adhesion of inter-coating.
TOPCOAT FINISHING
To deepen and enrich the colors, apply any MASTERPAV sealer series after the MASTERPAV WB 100 Color Stain is completely dry.
REFER TO SYSTEM
AVAILABLE COLOR
BLACK
BROWN
CHILI RED
ORANGE
GREEN
YELLOW
